{Chrysler 300} 64 console shift cable adjustment

["'ALLAN POZDOL' via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>]

Now for the third time after following the service manual adjustment procedure to the T, I arrive back in the garage with reverse gone and pushing the shifter hard forward to get into Park. Will start in Neutral, and lower gears engage.

 

I am having the shifter held back hard in low gear as I adjust the cable at the trans.

 

Would I be advised to err with the cable deeper or outward with the star wheel final setting? Or not hold the shifter back?

 

Has anyone run into the same issue? I never had an issue with push button shifters.

 

Allan

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion visit https://groups.google.com/d/msgid/chrysler-300-club-international/1926630994.3392144.1742414501784%40connect.xfinity.com.