RE: [Chrysler300] Protecting hard to access enclosed areas

["Gary Nelson" <gnelson@xxxxxxxxxxxx>]

POR 15 is the absolute best for rust control. It actually likes tight rust.
With a garden sprayer you can reach spaces not accessible to spray gun. I
also drill holes in end of rockers to reach from both sides. Not cheap at
$150 for a 4 quart pack. Depending on what you plan to coat may only need 1
or 2 qts. Goggle POR 15 to find sources all over the US.
Any restoration shop worth it's salt uses POR15.

Thank you,
Gary, the parts doc
Reno, Nevada 89521 USA
The Biggest Little City In The World
Mail: garythepartsdoc@xxxxxxxxxxxx
775 851-1420






  -----Original Message-----
  From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx]On
Behalf Of Carlton Schroeder
  Sent: Tuesday, October 13, 2009 10:11 AM
  To: Chrysler300@xxxxxxxxxxxxxxx
  Subject: [Chrysler300] Protecting hard to access enclosed areas


    Howdy,

  There is good frame-painting info in the Tech Area of the Club website but
I didn't see any info on protecting the hard-to-access enclosed areas in the
sub frames and enclosed channels in the trunk area. There are many access
holes for air blowing and high-pressure water cleaning so I think they can
be cleaned pretty well but they probably would still have surface rust.

  Without having an option to dip the frame area in paint would spray
painting through the access holes be adequate?

  Does anyone have other suggestions that would result in decent protection
to the interior surfaces?

  Thanks,

  Carlton Schroeder
  Eagle River, WI
  (2" snow yesterday and temps about 15 - 20 F below normal)

  [Non-text portions of this message have been removed]



  


[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/