Re: [Chrysler300] Protecting hard to access enclosed areas

[Mark Souders <MRS954@xxxxxxx>]

Carlton,

Eastwood Company has a rustproofing kit, their item number 50369 ZP. I used it several years ago on a few cars. It works well. It even comes with little body plugs if you want to drill holes to shoot the stuff into otherwise inaccessible areas.



Regards,

Mark Souders

300H

Mohrsville, PA




-----Original Message-----
From: Carlton Schroeder <schroe99@xxxxxxxxxxxx>
To: Chrysler300@xxxxxxxxxxxxxxx
Sent: Tue, Oct 13, 2009 1:10 pm
Subject: [Chrysler300] Protecting hard to access enclosed areas




Howdy,

There is good frame-painting info in the Tech Area of the Club website but I 
didn't see any info on protecting the hard-to-access enclosed areas in the sub 
frames and enclosed channels in the trunk area.  There are many access holes for 
air blowing and high-pressure water cleaning so I think they can be cleaned 
pretty well but they probably would still have surface rust.  

Without having an option to dip the frame area in paint would spray painting 
through the access holes be adequate?  

Does anyone have other suggestions that would result in decent protection to the 
interior surfaces?

Thanks,

Carlton Schroeder
Eagle River, WI
(2" snow yesterday and temps about 15 - 20 F below normal)    



[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links






[Non-text portions of this message have been removed]



------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/