Re: [Chrysler300] Re: 300F cam gear

[dan300f@xxxxxxx]

Hi all:
 
If anyone is interested, under Technical Article #16 in the web site, All 
About Rams, you will find the following:
 
The cam gear is special for the ram cars. The gear has the cam locating pin 
hole retarded 2 degrees that makes the crank gear timing at the damper 4 
degrees retarded but does not effect the specific timing of the engine according to 
the factory ignition timing sequence at the damper. This "retarding" affects 
the mid to high range torque output of the engine. The combination of the cam 
retard and the ram action produces optimum horsepower and torque. Engines 
rebuilt with the "standard" cam gear produce 10-15% less power and torque.

Dan Reitz
Northridge, Ca
300F



**************Looking for simple solutions to your real-life financial 
challenges?  Check out WalletPop for the latest news and information, tips and 
calculators.      (http://www.walletpop.com/?NCID=emlcntuswall00000001)


[Non-text portions of this message have been removed]


------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/