
Re: [Chrysler300] Rusty plastic?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Chrysler300] Rusty plastic?
- From: G Barker <gbarker@xxxxxxxxxxxx>
- Date: Fri, 23 Mar 2007 01:12:42 -0800
Sean Duggan wrote:
>CLR is great stuff. I tried all kinds of plastic products on an extra
>set of lenses I had and nothing
>seemed to work and worse alot of product left marks, but the best
>product I have used is brasso.
>We've used brasso for years in the film industry for cleaning and
>polishing plastic and I have to
>say that it works better than most products that are meant to clean
>plastic. My 62 tail lights were
>in terrible condition, but they look better now with elbow grease and
>brasso.
>
>Sean Duggan
>Los Angeles
>
>On Mar 22, 2007, at 8:23 AM, John J. Hertog wrote:
>
>
>
>>Any suggestions as to how to remove rust stains from clear, front
>>parking
>>light lenses? these stains are on the inside of the lenses, both
>>sides;
>>and both lenses are in MINT condition - except for the stains. My low
>>mileage 300F convert. sat in a moist garage for a couple decades,
>>and water
>>seeped around the housings, into the lenses. I'd like to save them and
>>reuse them, as they are original to the car. I have tried soaking in
>>water, scrubbing with various kitchen cleaning stuff and soft
>>bristle brush,
>>all to no avail. Don't want to use too harsh an abrasive or too hard a
>>brush so as not to scuff up the plastic. Anyone dealt with this
>>before, or
>>knows what specific stuff will dissolve rust stains?
>>
>>Thanks in advance
>>John Hertog
>>Sag Harbor NY
>>
>>
>>
>>[Non-text portions of this message have been removed]
>>
>>
>>
>>
>>
>
>
>
>[Non-text portions of this message have been removed]
>
>
>
>To send a message to this group, send an email to:
>Chrysler300@xxxxxxxxxxxxxxx
>
>For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm
>
>For archives go to http://www.forwardlook.net/300-archive/
>Yahoo! Groups Links
>
>I just bought a kit to polish my Chryslers plastic headlite covers. I wonder how it would work?
>
>
Gary Barker
>
>
>______________________________________________________
>This email was pre-scanned by Spam Guardian
>A Service Provided by http://www.foothill.net
>
>
>
[Non-text portions of this message have been removed]
To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx
For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm
For archives go to http://www.forwardlook.net/300-archive/
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Chrysler300/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/Chrysler300/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:Chrysler300-digest@xxxxxxxxxxxxxxx
mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Back to the Home of the Forward Look Network
Archive Sitemap