[Chrysler300] Rusty plastic?

["John J. Hertog" <crossram@xxxxxxxxxxxxx>]

Any suggestions as to how to remove rust stains from clear, front parking
light lenses?  these stains are on the inside of the lenses, both sides;
and both lenses are in MINT condition - except for the stains. My low
mileage 300F convert. sat in a moist garage for a couple decades,  and water
seeped around the housings, into the lenses.  I'd like to save them and
reuse them, as they are original to the car.    I have tried soaking in
water, scrubbing with various kitchen cleaning stuff and soft bristle brush,
all to no avail.  Don't want to use too harsh an abrasive or too hard a
brush so as not to scuff up the plastic.  Anyone dealt with this before, or
knows what specific stuff will dissolve rust stains?
 
Thanks in advance
John Hertog
Sag Harbor NY
 
 


[Non-text portions of this message have been removed]



To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/ 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:Chrysler300-digest@xxxxxxxxxxxxxxx 
    mailto:Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/