Re: [Chrysler300] A BRAKING Quandry !!!

["Ron Stewart" <rstewart@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx>]

 check brake hose , it is possibly the culprit. collasped inside. c300ron
  ----- Original Message ----- 
  From: Chrysler300E@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx 
  To: Chrysler300@xxxxxxxxxxxxxxx 
  Sent: Sunday, November 12, 2006 2:21 PM
  Subject: [Chrysler300] A BRAKING Quandry !!!


  Good Afternoon Everyone Out There In 300 Land!!!

  I have a braking quandry on my 300E.

  I have recently pulled the car out of storage - having been stored since 
  May. She started right up and everything is fine. However, when applying the 
  brakes, the big girl pulls to the left. My first inclination was that, since 
  sitting so long, maybe the wheel cylinders were frozen up. So, I proceeded 
  to do a brake job all the way around - all 4 wheels. Let me tell ya, getting 
  those rear hubs off was a job! The wheels, brake linings, cylinders, etc., 
  were fine. Filled her back up with brake fluid, bled the brakes, and the same 
  problem persists! Anyone have any suggestions out there??? Thank you all 
  in advance!!!

  Tom
  Miami, FL 
  59 300E

  [Non-text portions of this message have been removed]



   

[Non-text portions of this message have been removed]