Re: [Chrysler300] electric choke wiring

[Mike Apfelbeck <moparmike@xxxx>]

Del,
You could hook the electric choke wires up to the 12v. (switch) side of the 
ballast resistor.
The brake light switch could be sticking, pull one of the wires off the 
switch at the master cylinder to check.
Mike

At 10:03 PM 12/3/2003 -0500, a61300g wrote:
> Hello All,
> Installing electric chokes on my G and need advice on where to hook up
> the wiring. Hooked up to the rear top oil pressure sender with poor
> results. Should I route thru firewall to ignition switch or does someone
> know better way ?? Also have a problem with the left ( and sometimes both )
> brake lights staying on after car is shut off - could be short in brake
> light switch ?? All other lighting functions are normal. Thanks in advance
> for any help.
>
> Del Kerney