Re: [Chrysler300] 300 G Rear Shelf Panel

[Paul Martin <paul_martin78ca@xxxx>]

Richard
Just finished installing one of these myself. I use a
razor knife with a fresh blade. A jig saw will be too
rough and may tear. Two passes with the razor knike
and I was through the material.
Paul
300F
Vancouver BC --- Richard Osborne
<richard@xxxx> wrote: > Good Morning,
> 
> Finally moved into the new house and tired of
> working on it. Trying to
> divert things back to the 300 G, temporarily.
> 
> I have a new rear shelf panel from Goers (mesh vinyl
> and press board).
> I need to cut out the speaker/defroster holes. I was
> going to use a jig
> saw, but wanted to ask if anyone has cut these with
> another method? If
> so, how did you do this? If you used the jig saw,
> what type of blade did
> you use (metal, wood...)?
> 
> Thanks,
> 
> Richard Osborne
> 
> ------------------------ Yahoo! Groups Sponsor
> 
> To send a message to this group, send an email to:
> Chrysler300@xxxxxxxxxxxxxxx
> 
> For list server instructions, go to
> http://www.chrysler300club.com/yahoolist/inst.htm 
> 
> To unsubscribe from this group, send an email to:
> Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
> 
> 
> 
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/ 
> 
> 

______________________________________________________________________ 
Post your free ad now! http://personals.yahoo.ca