RE: [Chrysler300] '63 Chrysler-Odometer reset procedure?

[Mark Souders <souders@xxxx>]

Mark,
I recently reset my odometer on my 62 by gently removing the pin with the
gears on it, and rolling the numbers by hand by turning the gear on the
barrel. It worked in either direction, so if yours shows less than the
original, you can advance it and if it shows more, you can set it back.
Just be careful not to lose the little bushings on the top and bottom of the
gear pin. When you re-install the pin, bend the aluminum retaining tab
enough to eliminate the play, but not too tight so it doesn't bind. If you
remove the barrel with the numbers on it, you'll have difficulty lining up
the numbers when you re-install it.

Mark


> -----Original Message-----
> From:	mplindahl@xxxx [SMTP:mplindahl@xxxx]
> Sent:	Thursday, May 22, 2003 12:24 PM
> To:	Chrysler300@xxxxxxxxxxxxxxx
> Subject:	[Chrysler300] '63 Chrysler-Odometer reset procedure?
> 
> Hi All,
> 
> I have a replacement dash cluster and now I would
> like to reset the new odometer to the original miles.
> 
> Does anyone have a procedure for resetting
> the odometer?
> 
> 300ly,
> Mark Lindahl
> '63 300 Conv.
> Barrington, IL
> 
> 
> Yahoo! Groups Sponsor	
> 
> <http://rd.yahoo.com/M=251812.3170658.4537139.1261774/D=egroupweb/S=170671
> 3852:HM/A=1564415/R=0/*http://www.netflix.com/Default?mqso=60164784&partid
> =3170658>	
> 
> <http://us.adserver.yahoo.com/l?M=251812.3170658.4537139.1261774/D=egroupm
> ail/S=:HM/A=1564415/rand=183004773>	
> 
> To send a message to this group, send an email to:
> Chrysler300@xxxxxxxxxxxxxxx
> 
> For list server instructions, go to
> <http://www.chrysler300club.com/yahoolist/inst.htm> 
> 
> To unsubscribe from this group, send an email to:
> Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
> 
> 
> 
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service
> <http://docs.yahoo.com/info/terms/>. 


[Non-text portions of this message have been removed]