M/P dist. mod for tach drive cars; also,300G stick car for sale

[John Hertog <crossram@xxxx>]

Hi to all:
2 birds with one stone :

First bird:
http://autos.recycler.com/asp/AdDetails.asp?sKW=chrysler&bAnd=1&iSC=5000&sAC
=%27All%27&iAA=&optWtd=&optSrc=&curNP=&curXP=&iNYr=1924&iXYr=1975&cmdBtn=Fin
d+It%21&x=71&y=14&iID=42495&sBAC=909&bSQ=0
copy and paste this link into your browser for an ad for a 300G 3 speed car
for sale.
Located in Orange County - Anaheim CA as per phone number
I know nothing about this, ad provided by Sam Haberman. If anyone contacts
the seller, please ask for the VIN and let me or Gloria Moon know....

Second bird:
re: distributors

Gerry Steinberg writes:

Hi John: Chuck Hill did my distributor about 11-12 years ago. He kept the
tach drive and of course the vacuum advance. Nice not to have to fuss
with points. I spoke to him about a month ago and he is willing to do the
same for
anybody. His e-mail is: mochuckpar@xxxx
Phone: 775/265-0548, in Gardnerville, Nevada, near Reno.
Good luck and stay warm.....
Gerry

also, Larri Stumpf on same topic:
Hi John and all, I too put mopar electronlc guts into a tach drive
ditributor years ago on a dual ghia I did. It was surprisingly easy as the
pickup plate bolted right in where the point plate used to and the shafts
interchanged.All I had to do was drill a hole in the shaft to accept the
rollpin that secures the gear that drives the tach.This was over 10 years
ago and my memory isnt what it used to be but I think thats it. mopar to
ya...larri