Trunk Insulation Paper

[moparpjf@xxxx]

Hi all
Anyone know of a supplier for the original type insulation paper fitted on 
the inside of the trunklid. Any tips on installation would also be greatly 
appreciated........do you have to seperate the outer skin?
Thanks for the help.
Owen 

Hi Owen - 

I believe that Bob Merritt sells rolls of the material in question, or 
at least material that is as close as you can get. If you cut out your 
existing panels at a 45 degree angle with a box cutter or similar blade, so 
that the bevel cut extends under the metal bracing, you can use the cut out 
panels as templates, and glue in the replacements with GM adhesive. These 
panels were not painted, per se, but did receive ovrspray when the inside of 
the decklid was painted, so if you act accordingly, you should come up with a 
fairly correct result, or at least one that will appear so. I believe that 
the treatment of this area was diverse enough, that you cannot be "wrong" if 
you use the correct material.

Pete Fitch


[Non-text portions of this message have been removed]