RE: [Chrysler300] Trunk insulation paper

["Jim Pristelski" <ajp002@xxxx>]

Hi Owen,

It would be a nearly incredible job to replace this paper. I have seen one
restorer use a razor blade edge to cut out the old paper by using the
interior sheetmetal braces as a guide. This leaves the paper under the
braces so that there are no rattles. This restorer then used a bead of
caulk or the like (use a caulk or body putty that is paintable,i.e., not
silicone) to provide a neat edge or transition along the cut edge of the
paper (and along the edges of the braces). The metal previously under the
paper was then painted just like the remaining metal. It gave a neat and
clean look, but of course, not original. Best regards, Jim

-----Original Message-----
From: Owen & Jo Grigg [mailto:ram300@xxxx]
Sent: Tuesday, January 15, 2002 5:55 PM
To: Chrysler300@xxxxxxxxxxxxxxx
Subject: [Chrysler300] Trunk insulation paper


Hi all
Anyone know of a supplier for the original type insulation paper fitted on
the inside of the trunklid. Any tips on installation would also be greatly
appreciated........do you have to seperate the outer skin?
Thanks for the help.
Owen


[Non-text portions of this message have been removed]



To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

For list server instructions, go to
http://www.chrysler300club.com/yahoolist/inst.htm

To unsubscribe from this group, send an email to:
Chrysler300-unsubscribe@xxxxxxxxxxxxxxx



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/