Re: [Chrysler300] 300C brakes

["John L. Chesnutt" <chesnutt@xxxx>]

The brake support plates were painted black. Be sure to apply a thin film of
Bendix Brake Lubricant at all points of contact where metal friction contact
may occur. This is where the metal part of the brake shoe contacts the
support plate.
John & Arlys Chesnutt, Portland, OR. 300C
----- Original Message -----
From: "Owen & Jo Grigg" <ram300@xxxx>
To: <Chrysler300@xxxxxxxxxxxxxxx>
Sent: Monday, August 27, 2001 2:12 PM
Subject: [Chrysler300] 300C brakes


> Hi all
> I am about to reassemble the brakes back up on my C. Are the brake support
plates, with the adjusters on them, painted or natural, mine appear to have
some sort of coating on them. Also, I'm guessing that the brake drum is a
natural finish........ or are they painted? Any idea what type of paint to
use on the drums to handle the heat?
> Thanks for the help!
> Owen
>