Hi Group, Well, I just put my 70 300 land barge back on the road after rebuilding the engine and transmission. Everything worked great for about 10 miles. Then the tranny started to make a noise that sounded like a squeaky fan belt (it wasn't a belt, I checked). Shortly after that it started to lose forward gears. It still moves, but you have to rev the motor to make it go, it acts just like it is out of fluid. Putting it in drive produces no noticeable change until you rev, then it shudders and takes off. Putting it in reverse is still the normal bump, but the squeak stays all the time. Fluid is up to proper level and still nice and pink, no burnt smell. I have rebuilt several 727s, but never had a problem before. Anyone have any ideas on what to check for before (or after) I pull it back out. Thanks. On a happier subject, I installed the TTI headers and 2 1/2" exhaust system. They are very good folks to work with. The right header did not fit due to torsion bar interference. They took the header back at their expense and found it had pulled during the welding process. When they returned it to me, was able to put it on with about 3/8" torsion bar clearance from the collector. So far, with new mounts all the way around, there is no contact. It is a very nice looking and very good sounding exhaust. Bill Huff ------------------------ Yahoo! Groups Sponsor ---------------------~--> Yahoo! Autos. Everything you need to know about buying or selling a car. FREE Quotes, 360° Tours, Research, Blue Book, Compare Vehicles, Buy Used http://us.click.yahoo.com/kEZsdA/bwnGAA/YiGOAA/8LmulB/TM ---------------------------------------------------------------------~-> To send a message to this group, send an email to: Chrysler300@xxxxxxxxxxxxxxx For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/Chrysler300/ <*> To unsubscribe from this group, send an email to: Chrysler300-unsubscribe@xxxxxxxxxxxxxxx <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/