
------------------------ Yahoo! Groups Sponsor ---------------------~-->
Sell a Home for Top $
http://us.click.yahoo.com/RrPZMC/jTmEAA/jd3IAA/8LmulB/TM
---------------------------------------------------------------------~->
To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx
For list server instructions, go to
http://www.chrysler300club.com/yahoolist/inst.htm
To unsubscribe from this group, send an email to:
Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
------------------------------------------------------------------------
There are 12 messages in this issue.
Topics in this digest:
1. This might not be important but..................
From: "car man" <carbuyer02@xxxxxxxxxxx>
2. Re: Plating of Marker lights for the G
From: Leggatt <leggatt@xxxxxxx>
3. Front WCFB Carb found
From: paul holmgren <paulholm@xxxxxxxxxxxxx>
4. Speedo repair
From: "Jerry Browarski" <mopar-man@xxxxxxxxxxx>
5. 2x4 WCFB carb found
From: paul holmgren <paulholm@xxxxxxxxxxxxx>
6. RE: Official Recognition From Chrysler
From: TNHARKINS@xxxxxxx
7. Re: 2x4 WCFB carb found
From: "Charlie Valentine" <cross.ram@xxxxxxxxxxx>
8. bezel clips for '56 Imperial driver's 4-door-window switch
From: "bevacqua" <tonysru2@xxxxxxx>
9. Re: RE: Official Recognition From Chrysler
From: Ray Jones <hurst300@xxxxxxxxxxx>
10. stalling problem
From: "my69300" <tubman@xxxxxxxxxxxxx>
11. chrysler parts
From: "Robertson" <mald@xxxxxxxxxx>
12. 1/64 collectible
From: "Charles Heinitz" <ccheinitz@xxxxxxxxxxx>
________________________________________________________________________
________________________________________________________________________
Message: 1
Date: Sun, 27 Oct 2002 14:42:46 +0000
From: "car man" <carbuyer02@xxxxxxxxxxx>
Subject: This might not be important but..................
I saw the chrysler 300 letter cars on AMERICAN MUSCLE car today
it was great and some people from our club
i thought that was great
keep it up
shawn
_________________________________________________________________
Protect your PC - get McAfee.com VirusScan Online
http://clinic.mcafee.com/clinic/ibuy/campaign.asp?cid=3963
________________________________________________________________________
________________________________________________________________________
Message: 2
Date: Sun, 27 Oct 2002 11:25:43 -0500
From: Leggatt <leggatt@xxxxxxx>
Subject: Re: Plating of Marker lights for the G
Hi Richard,
Leave the sockets in place and have him plate with copper then mask
'em off for the
nickel and chrome. If that doesn't work I've got replacement sockets to
fit complete with
the wire pigtails.
I'm pleased to hear about the beer fridge!!
Greg.
Richard Osborne wrote:
> Good Evening,
>
> I have just ordered a replacement beer frige for the garage, so this
> means I can start working on the car again.
>
> Are there any recommended ways of removing the light sockets from the
> front parking light housings? I just thought I would try to do this
> before they go to the platers.
>
> Best regards,
>
> Richard Osborne
>
>
> To send a message to this group, send an email to:
> Chrysler300@xxxxxxxxxxxxxxx
>
> For list server instructions, go to
http://www.chrysler300club.com/yahoolist/inst.htm
>
> To unsubscribe from this group, send an email to:
> Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
>
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
________________________________________________________________________
________________________________________________________________________
Message: 3
Date: Sun, 27 Oct 2002 12:16:08 -0500
From: paul holmgren <paulholm@xxxxxxxxxxxxx>
Subject: Front WCFB Carb found
As some of you might know, I have been HUNTing for some WCFB carbs for
a long time.
Today at a local swap I saw a WCFB front carb from a 2x4 setup.
IT IS NOT ALL THERE!!!
But it does have the brass tag 2636. I have NOT looked this up
But I think its 57 Desoto, I know it is not 57 Chrysler.
The vender knows what he has, it is not cheeeep (in my opinion, But
I aint a gonna pay chebby vette nuts $$$ for mopar carbs!!!)
IF anyone is interested I can go into details privately.
I did not buy it but have the contact info.
--
Paul Holmgren
Hoosier Corps #33, L-6
2 57 300-C's in Indy
________________________________________________________________________
________________________________________________________________________
Message: 4
Date: Sun, 27 Oct 2002 13:15:37 -0500
From: "Jerry Browarski" <mopar-man@xxxxxxxxxxx>
Subject: Speedo repair
Just wanted to let everyone know that I did finally get my C300's speedo
repaired and reinstalled over a week ago. I want to thank George Riehl
for
the info about Specmo on Woodward in Royal Oak. Got a couple of other
recommendations but this was far closer to my house than the others which
is
the main reason I used them. The car is still for sale and if I don't get
any positive responses from club members pretty soon I'll put it on the
nationwide market. If you have any questions send me an email.
Jerry Browarski
________________________________________________________________________
________________________________________________________________________
Message: 5
Date: Sun, 27 Oct 2002 13:25:31 -0500
From: paul holmgren <paulholm@xxxxxxxxxxxxx>
Subject: 2x4 WCFB carb found
As some of you might know, I have been HUNTing for some WCFB carbs for
a long time.
Today at a local swap I saw a WCFB front carb from a 2x4 setup.
IT IS NOT ALL THERE!!!
But it does have the brass tag 2636. I have NOT looked this up
But I think its 57 Desoto, I know it is not 57 Chrysler.
The vender knows what he has, it is not cheeeep (in my opinion, But
I aint a gonna pay chebby vette nuts $$$ for mopar carbs!!!)
IF anyone is interested I can go into details privately.
I did not buy it but have the contact info.
--
Paul Holmgren
Hoosier Corps #33, L-6
2 57 300-C's in Indy
________________________________________________________________________
________________________________________________________________________
Message: 6
Date: Sun, 27 Oct 2002 14:05:00 EST
From: TNHARKINS@xxxxxxx
Subject: RE: Official Recognition From Chrysler
Hi Good People:
I just received Vol 1 ; Issue 1 of Chrysler's brand new Chrysler Owners
Magazine.
Inside on page 3 is a photo of a 300F and on page 72, the Motor Trend car
of
the Year, 300C.
The mag had a few good words to say about our "Beautiful Brutes" and the
traditions they uphold.
Tom H
300s4ever
[Non-text portions of this message have been removed]
________________________________________________________________________
________________________________________________________________________
Message: 7
Date: Sun, 27 Oct 2002 16:40:33 -0800
From: "Charlie Valentine" <cross.ram@xxxxxxxxxxx>
Subject: Re: 2x4 WCFB carb found
I looked this number up on a carb website and found out it is for the
following.
1957 DeSoto V8 345 (Rear of 2) Carter WCFB # 2636
I looked into the Chevy listing but could not find an application for
this
number in the Chevies. Anyway it looks like it may be only for the DeSoto.
Charlie Valentine
300G, 62 Sport Convert.
----- Original Message -----
From: "paul holmgren" <paulholm@xxxxxxxxxxxxx>
Cc: <Chrysler300@xxxxxxxxxxxxxxx>
Sent: Sunday, October 27, 2002 10:25 AM
Subject: [Chrysler300] 2x4 WCFB carb found
> As some of you might know, I have been HUNTing for some WCFB carbs for
> a long time.
> Today at a local swap I saw a WCFB front carb from a 2x4 setup.
> IT IS NOT ALL THERE!!!
> But it does have the brass tag 2636. I have NOT looked this up
> But I think its 57 Desoto, I know it is not 57 Chrysler.
> The vender knows what he has, it is not cheeeep (in my opinion, But
> I aint a gonna pay chebby vette nuts $$$ for mopar carbs!!!)
>
> IF anyone is interested I can go into details privately.
> I did not buy it but have the contact info.
>
> --
> Paul Holmgren
> Hoosier Corps #33, L-6
> 2 57 300-C's in Indy
>
>
> To send a message to this group, send an email to:
> Chrysler300@xxxxxxxxxxxxxxx
>
> For list server instructions, go to
http://www.chrysler300club.com/yahoolist/inst.htm
>
> To unsubscribe from this group, send an email to:
> Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
>
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>
>
________________________________________________________________________
________________________________________________________________________
Message: 8
Date: Sun, 27 Oct 2002 15:12:16 -0800
From: "bevacqua" <tonysru2@xxxxxxx>
Subject: bezel clips for '56 Imperial driver's 4-door-window switch
I need some help, please. I have not heard from a soul re these clips.
Right now my 4-banger is hanging down the side of my door. Looks bad.
Must
be some clips out there! Please help. Thank you.
I did get a response for the inside door handle clip. It should be on the
way to me. Thanks, Jeff/Michael.
Tony
'56 Imperial 4 door sedan
________________________________________________________________________
________________________________________________________________________
Message: 9
Date: Sun, 27 Oct 2002 17:16:42 -0600
From: Ray Jones <hurst300@xxxxxxxxxxx>
Subject: Re: RE: Official Recognition From Chrysler
Good News!!
So, how does one go about getting this Mag, short of buying a new
Chrysler?
Ray Jones
> From: TNHARKINS@xxxxxxx
> Date: Sun, 27 Oct 2002 14:05:00 EST
> To: chrysler300@xxxxxxxxxxxxxxx
> Subject: [Chrysler300] RE: Official Recognition From Chrysler
>
> Hi Good People:
>
> I just received Vol 1 ; Issue 1 of Chrysler's brand new Chrysler Owners
> Magazine.
> Inside on page 3 is a photo of a 300F and on page 72, the Motor Trend
car of
> the Year, 300C.
> The mag had a few good words to say about our "Beautiful Brutes" and the
> traditions they uphold.
>
> Tom H
> 300s4ever
>
>
> [Non-text portions of this message have been removed]
>
>
>
> To send a message to this group, send an email to:
> Chrysler300@xxxxxxxxxxxxxxx
>
> For list server instructions, go to
> http://www.chrysler300club.com/yahoolist/inst.htm
>
> To unsubscribe from this group, send an email to:
> Chrysler300-unsubscribe@xxxxxxxxxxxxxxx
>
>
>
> Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>
>
>
________________________________________________________________________
________________________________________________________________________
Message: 10
Date: Sun, 27 Oct 2002 23:40:54 -0000
From: "my69300" <tubman@xxxxxxxxxxxxx>
Subject: stalling problem
HI ALL
TRIED YOUR SUGGESTION ABOUT PLUGS,WIRES,ROTOR
IT STILL RUNS LIKE CRAP.
I GUESS MY NEXT STEP IS GO THE CARB ROUTE.
HOW DO I DETERMINE IF THE CARB NEED TO BE
REBUILT OR JUST A MINOR ADJUSTMENT.
IS THERE A GOOD BOOK YOU GUYS CAN SUGGEST ??
THANKS CHRIS
________________________________________________________________________
________________________________________________________________________
Message: 11
Date: Mon, 28 Oct 2002 13:35:47 +1300
From: "Robertson" <mald@xxxxxxxxxx>
Subject: chrysler parts
could anyone let me know if anyone is parting out a 1961 2 door hardtop
chrysler as i need a rear half as the trunk floor and rear guards are very
rusted on the 300g i am restoring. or can you buy patch panels for these
areas. ? or are there any wrecking yards on the west coast of the us that
have these vehicles ? thanks murray.
[Non-text portions of this message have been removed]
________________________________________________________________________
________________________________________________________________________
Message: 12
Date: Sun, 27 Oct 2002 21:28:03 -0800
From: "Charles Heinitz" <ccheinitz@xxxxxxxxxxx>
Subject: 1/64 collectible
For any one who hasn't seen it there is a 57 300 C 1/64 model for sale by
Route 66 toy co. Look for it in the match box section. Trunk and hood
opens
sells for 4.99. I bought an extra if anyone wants one for that price plus
shipping. I found them at K Mart. Really nice detail. They also have a 70
plymouth fury,& dodge daytona but could not find those as yet. Will keep
looking. Chuck
_________________________________________________________________
Get a speedy connection with MSN Broadband.? Join now!
http://resourcecenter.msn.com/access/plans/freeactivation.asp
________________________________________________________________________
________________________________________________________________________
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
<<attachment: winmail.dat>>