[FWDLK] Neutral safety switch
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[FWDLK] Neutral safety switch



 
 
 
Recently discovered that my neutral safety switch is not functioning properly e.g. Starts in any gear. I have a '59 Belvedere 318. T flight trany. Two years ago I replaced the safety switch , last summer I replaced the starter solenoid . I removed the safety switch from the trany and I can feel the toggle switch inside the trany move when working the push buttons. I reinstalled the switch and tightened it thinking it wasn't making contact. However the problem is still there. I am in the process of having the switch checked for continuity. I understand that this is only a ground out switch for the solenoid seeing as there is only one wire. I have checked the forum but was not able to find anything on this. Question : does anyone have any suggestions? Thanks in advance. Don from Canada.
FREE Animations for your email - by IncrediMail! Click Here!

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1




Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.