Re: [FWDLK] Front seat problem

[Mike Apfelbeck <moparmike72@xxxxxxxxxxx>]

I used a set of power seat tracks under the bench in my '57 hardtop, the
parts came out of a 1970 Dodge Polara,ex-police cruiser. Bolted right on
the bottom of the seat frame, had to fudge the mounting holes in the
floor just a bit to get things lined up. Height and fore/aft adjustment
worked out just right.

Mike

At 05:59 PM 11/30/2009, Jan & Roger van Hoy wrote:
> My point was
> intended to be that maybe the later C body seat tracks could be
> retrofitted to the '59, then dropped to their lowest adjustment.
>  
> --Roger van Hoy, Washougal, WA, '55 DeSoto, '58 DeSoto, '56
> Plymouth, '66 Plymouth, '41 Dodge

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1