or try www.kanter.com .
. . some big(?) trucks may have a different hub (large?) on the front than
passenger cars though, I think we found some 'truck' hemi parts in an old '47
ford truck my buddy drug home . . .
Larry,
These
are on eBay about every week. Another alternative is to locate a rebuilding
service on the Internet.
The
water pumps for Dodge Hemis and Polys are the same. There was a major change in
1957. Up to 1956 (315 V8), the water pumps had 4 bolts holding them to the
engine. In 1957 (325 V8), they used 5 bolts. I’m not familiar with trucks that
much, so you need to verify how many bolts your pump uses.
Dave
Homstad
56 Dodge
D500
-----Original
Message----- From: Forward Look
Mopar Discussion List [mailto:L-FORWARDLOOK@xxxxxxxxxxxxx]On Behalf Of Larry Gardinier Sent: Sunday, October 07, 2007 1:13
PM To:
L-FORWARDLOOK@xxxxxxxxxxxxx Subject: [FWDLK] 315 poly water
pump
My father is
looking for a waterpump for his 1957 Dodge truck with a 315 poly motor. Napa
says it's not available, surely someone here knows where one can found. Any help
is greatly appreciated.
Thanks,
Larry
Gardinier
*************************************************************
To unsubscribe or set your subscription options,
please go to http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
*************************************************************
To unsubscribe or set your subscription options,
please go to http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
*************************************************************
To unsubscribe or set your subscription options,
please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
|