Re: [FWDLK] Stabilizing influences...
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [FWDLK] Stabilizing influences...



I put a 56 Imperial sway bar into my 56 Dodge. It bolted right in where the
old one was with out any mods. Made a noticeable improvement in handling.

Dave Homstad
56 Dodge D500

-----Original Message-----
From: Forward Look Mopar Discussion List
[mailto:L-FORWARDLOOK@xxxxxxxxxxxxx]On Behalf Of eastern sierra Adj Services
Sent: Friday, January 06, 2006 1:34 AM
To: L-FORWARDLOOK@xxxxxxxxxxxxx
Subject: [FWDLK] Stabilizing influences...

the "hot-rodding"  article, that Wayne 'Forwarded', included the
picure/comment, that the author had  located an IMP sway bar assembly,
which would "bolt onto" the PLY's frame.

Firstly, I hope he scored (removed) a couple
of support brackets, that are welded to the frame (his pic didn't
show/reference them, but:

Secondly, it has been my general "knowledge"
that the big-dog CHRY/IMP sway bars could not, physically, be made to
mate to the Dodge
(or PLY, with-sway-bar-support-brackets installed ) frames, and/or with
DOD/PLY  lower control arms....

Does anyone know of an actual  big-bar
installation, on a Dodge, or Plymouth???

Neil Vedder

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.