Re: [FWDLK] [Chrysler300] Ball joint issue
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [FWDLK] [Chrysler300] Ball joint issue



"their "quality control" dep't checked another set and came
up with the same boot as they had sent me."
       It's pretty obvious that ALL their present kits are mis-manufactured.
A mistake perpetulates itself.
Demand a supervisor/owner and tell him that you're not just a weekend
mechanic that can be hookwinked. You KNOW this to be wrong, and why won't
they correct it?
Regards, RAy
--------------------------------------------------------------
Ray Jones, Jones Ridge, in the Ouachita Mtns near rural Mena, Western
Arkansas.
All Y'all come visit, Y'hear? We'll set onna porch and sip a few!


> From: John Hertog <crossram@xxxxxxxxxxxxx>
> Organization: Crossram Motors
> Date: Thu, 18 Nov 2004 08:22:35 -0500
> To: Chrysler 300 Club Listverver <Chrysler300@xxxxxxxxxxxxxxx>
> Cc: L-FORWARDLOOK@xxxxxxxxxxxxx
> Subject: [Chrysler300] Ball joint issue
>
> their "quality control" dep't checked another set and came
> up with the same boot as they had sent me.

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.