[FWDLK] Rocker panel drain holes
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[FWDLK] Rocker panel drain holes



Hi.
After fabricating and installing new rocker panels on my 57 Plymouth Fury, it is time to put the
drain holes back in place that these cars so desperately need to get rid of the water as quickly as
possible.
My original rocker panels that were on the Fury were incorrect, and so are of no help to me.
Could I ask some of you who have good unmolested 57 and 58 Plymouths, to check for me the location,
quantity, size and shape of the rocker panel drain holes, so that I can put them back in the correct
way on my Fury.
Many cars have replacement rocker panels, so it would be good to get a few replies and take the
consensus.
I am not sure if these would be the same on Dodge, Chrysler and Desoto also, so specifically looking
for 57/58 Plymouth replies only.
Thanks,
Glenn.
57 Fury,
Auckland, NZ.



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.