Re: [FWDLK] 413 Chrysler with 8 to 1 Compression Ratio?????
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [FWDLK] 413 Chrysler with 8 to 1 Compression Ratio?????





Curtis,

    You really did do your homework.!!!!!! I agree the 413 pistons are not readily available but I would hunt until I found them or punch the 413 out to 426 and used their pistons. If the motor is being torn completely down I feel that is the route to go. I feel if we talked to a guy with a 62 or 63 Ramcharger and he is rebuilding it he is not going to go to 8.1 CR.  However he may be a little reluctant to tell us his sources.
Thank you for the additional information.

                                                                                Ron



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.