Re: [FWDLK] Intl Shipping Ideas Needed
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [FWDLK] Intl Shipping Ideas Needed



That's what I like about the carpet rolls.  They're 1/2" - 3/4" thick, and EXTREMELY hard to crush.  I can sit and bounce on a 6' one stretched across two sawhorses without it breaking or crushing.
 
-Dave
-----Original Message-----
From: goiola [mailto:goiola@NETZERO.NET]
Sent: Wednesday, July 11, 2001 11:04 AM
To: L-FORWARDLOOK@LISTS.PSU.EDU
Subject: [FWDLK] Intl Shipping Ideas Needed

Just a little helpful hint - when shipping mouldings in a tube it might be a good idea to fasten a "splint" to the mouldings so if the cardboard tube happens to get crunched the splint might prevent damage to the mouldings. A splint can be anything stronger than the moulding - wood, conduit, etc. Also make sure the ends are securely fastened and you have good packing inside tube to prevent movement of mouldings.  I work for FedEx and almost daily see damaged tubes come down the belt.  If you have shorter mouldings to ship (4' or under) get some FedEx tubes (no charge).  These are triangular shaped and indestructible.  Can't recall ever seeing one of these damaged.  BTW FedEx will accept domestic packages (shipped within the states) up to 119" in length, 150# max.  International packages limitations are usually 108"  in length and between 110# and 150#. Sometimes this varies depending on the country.



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.