Larry, Most of the parts you need are at your Chrysler dealers. The retaining ring is part # 1730 095. The retaining seal is part # 1948 757 The pick-up filter is part # 1670 694 As for the float, I cannot locate a part number for it, but I do know that Chrysler no longer makes floats for tanks of the 1960's. However, as all the above parts fit on 1960's tanks, perhaps the floats interchange as well. That being the case, go to your Ford dealer and ask for part # COAZ-9202-B. The part number is for two floats, actually. Do not know if there is a part number for a single float. Hope this helps. Bill W Vancouver, BC > Hello list, > The car I'm working on is a 58 Plymouth Savoy 318 Poly automatic > I'm in need of the retaining ring that holds the fuel pick up/ fuel > gauge sending unit in place. I also need the it's gasket, a float and > the filter that goes on the end of the pick up. I think I can get the > filter from my local Chrysler dealer parts counter. But I'm not sure > about the rest. > On another note, > I asked in the past for advice regarding adjusting the shifter cable on > my automatic trans. A gentleman responded advising that I turn the > adjusting wheel, which my 64 Dodge has but my 58 Plymouth does not have. > It didn't look like it should have one, either. So this cable must be > adjustable, so how is it done? > Thanks for your help, > Larry Gardinier >
|