Service Manual says ¼ inch deflection with a 10 lb pull.
Dave Homstad
56 Dodge D500
-----Original
Message-----
From: Forward Look Mopar
Discussion List [mailto:L-FORWARDLOOK@xxxxxxxxxxxxx]On Behalf Of Jan & Roger van Hoy
Sent: Friday, August 08, 2008 1:02
AM
To: L-FORWARDLOOK@xxxxxxxxxxxxx
Subject: Re: [FWDLK] Fan Belt
tension
1/2 "
deflection in the middle of the longest gap between pulleys.
--Roger van
Hoy, Washougal, WA, '55 DeSoto, '58 DeSoto, '56 Plymouth, '66 Plymouth, '41
Dodge
-----
Original Message -----
To: L-FORWARDLOOK@xxxxxxxxxxxxx
Sent: Thursday, August 07,
2008 9:11 AM
Subject:
[FWDLK] Fan Belt tension
Gang,
I just replace the fan belt on my 56 Dodge. How tight
should I tension this belt? I just pulled the generator back as far
as I could and tightened the bolts. Should I use a lever bar to get
more tension or is it good to go?
Greg in WI
1956 Dodge Royal Lancer
*************************************************************
To
unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
*************************************************************
To
unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
Back to the Home of the Forward Look Network