Re: [FWDLK] [Chrysler300] Rusty plastic?

[Jim Faber <fabe7445@xxxxxxxxxxxxx>]

   Several other options might be "Wink" it removes rust and lime deposits from sinks etc. deposited
   by hard well water. You might also try Naval Jelly for steel. Both are non abrasive and no solvents.

   Jim Faber South Carolina - Spring is here
> 
> From: "Ron Waters" <ronbo97@xxxxxxxxxxx>
> Date: 2007/03/22 Thu PM 01:39:05 EST
> To: "'Chrysler 300 Broadcast'" <chrysler300@xxxxxxxxxxxxxxx>, 
> 	<L-FORWARDLOOK@xxxxxxxxxxxxx>
> Subject: Re: [Chrysler300] Rusty plastic?
> 
> John -
> 
> I would start with a new, firm-bristled toothbrush and a dilute solution of
> rubbing compound. If the results aren't satisfactory, keep strengthening the
> rubbing compound up to the point where you're using the stuff right from the
> can. Keep checking every few seconds to determine progress.
> 
> If you have a spare lens with a similar condition, best to practice on that
> one first.
> 
> Ron
> 
> ----- Original Message ----- 
> From: "John J. Hertog" <crossram@xxxxxxxxxxxxx>
> To: "'Chrysler 300 Broadcast'" <chrysler300@xxxxxxxxxxxxxxx>;
> <L-FORWARDLOOK@xxxxxxxxxxxxx>
> Sent: Thursday, March 22, 2007 10:23 AM
> Subject: [Chrysler300] Rusty plastic?
> 
> 
> > Any suggestions as to how to remove rust stains from clear, front parking
> > light lenses?  these stains are on the inside of the lenses, both sides;
> > and both lenses are in MINT condition - except for the stains. My low
> > mileage 300F convert. sat in a moist garage for a couple decades,  and
> water
> > seeped around the housings, into the lenses.  I'd like to save them and
> > reuse them, as they are original to the car.    I have tried soaking in
> > water, scrubbing with various kitchen cleaning stuff and soft bristle
> brush,
> > all to no avail.  Don't want to use too harsh an abrasive or too hard a
> > brush so as not to scuff up the plastic.  Anyone dealt with this before,
> or
> > knows what specific stuff will dissolve rust stains?
> >
> > Thanks in advance
> > John Hertog
> > Sag Harbor NY
> >
> >
> >
> >
> > [Non-text portions of this message have been removed]
> >
> >
> >
> > To send a message to this group, send an email to:
> > Chrysler300@xxxxxxxxxxxxxxx
> >
> > For list server instructions, go to
> http://www.chrysler300club.com/yahoolist/inst.htm
> >
> > For archives go to http://www.forwardlook.net/300-archive/
> > Yahoo! Groups Links
> >
> >
> >
> 
> 
> 

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1