Re: [FWDLK] Hand Brake Warning Light

[Ron Waters <ronbo97@xxxxxxxxxxx>]

The 1004 doesn't work either. The globe is 3/4" long, which is way too big
for this light.

Ron


----- Original Message ----- 
From: "Jim Hoekendijk" <jim.hoekendijk@xxxxxx>
To: <L-FORWARDLOOK@xxxxxxxxxxxxx>
Sent: Friday, September 02, 2005 2:42 PM
Subject: Re: [FWDLK] Hand Brake Warning Light


> Ron,
>
> I went into my garage and looked in the bag with lights. There's a
> carton with one lamp left, I think it's the one, but I'm not sure...
> It's similar to a 90, but longer, it's a....
> 1004
>
> Jim.
>
> ----- Oorspronkelijk bericht -----
> Van: Ron Waters <ronbo97@xxxxxxxxxxx>
> Datum: vrijdag, september 2, 2005 8:25 pm
> Onderwerp: Re: [FWDLK] Hand Brake Warning Light
>
> > Jim -
> >
> > Neil Vedder also suggested the 1816, but when I went to the local
> > auto parts
> > store, the 1816 they showed me is a tiny, single contact bulb. The
> > one I
> > need is a two contact bulb with a standard size base, similar to a
> > #90. I
> > should mention that this is hand brake warning light, part #
> > 1770721. Any
> > ideas ?
> >
> > Ron
> >
> > ----- Original Message ----- 
> > From: "Jim Hoekendijk" <jim.hoekendijk@xxxxxx>
> > To: <L-FORWARDLOOK@xxxxxxxxxxxxx>
> > Sent: Thursday, September 01, 2005 1:38 AM
> > Subject: Re: [FWDLK] Hand Brake Warning Light
> >
> >
> > > I had the same problem with my 57 Dodge. I found the answer in my
> > > workshop manual and the bulb at Pep Boys. It's only that I've
> > lent my
> > > manual to someone I can not reach now... Could be 1816, since I
> have
> > > some cartons left...
> > > Be carefull not to use to much candle power, I changed my lens
> > because> the prior owner did use a bulb with to much cancle power,
> > and the red
> > > lens is melted.
> > >
> > > Jim Hoekendijk.
> > > The Netherlands
> > > '57 Dodge D500
> > >
> > >
> > > ----- Oorspronkelijk bericht -----
> > > Van: Ron Waters <ronbo97@xxxxxxxxxxx>
> > > Datum: donderdag, september 1, 2005 3:27 am
> > > Onderwerp: Re: [FWDLK] Hand Brake Warning Light
> > >
> > > > Unfortunately, neither work. The glass globe is too large to fit
> > > > inside the
> > > > threaded cylindrical part that the front lens and bezel thread
> > > > onto. Am I
> > > > missing something ?
> > > >
> > > > Ron
> > > >
> > > >
> > > > ----- Original Message ----- 
> > > > From: "Bill Watson" <wwatson5@xxxxxxxxx>
> > > > To: <L-FORWARDLOOK@xxxxxxxxxxxxx>
> > > > Sent: Wednesday, August 31, 2005 3:54 PM
> > > > Subject: Re: [FWDLK] Hand Brake Warning Light
> > > >
> > > >
> > > > > According to the Chrysler Parts Catalogue, it is part number
> 142
> > > > 453.which
> > > > > is bulb #90 (6 candlepower)
> > > > >
> > > > > Dodge used a 142 451which is bulb #68 (3 candlepower)
> > > > >
> > > > >
> > > > > Bill
> > > > > Vancouver,. BC
> > > > >
> > > > >
> > > > >
> > > > > ----- Original Message ----- 
> > > > > From: "Ron Waters" <ronbo97@xxxxxxxxxxx>
> > > > > To: <L-FORWARDLOOK@xxxxxxxxxxxxx>
> > > > > Sent: Wednesday, August 31, 2005 12:29 PM
> > > > > Subject: [FWDLK] Hand Brake Warning Light
> > > > >
> > > > >
> > > > > > Hi Gang -
> > > > > >
> > > > > > My 58 Plymouth has a hand brake warning light, which is the
> > > > same as the
> > > > > one
> > > > > > used on the 58 Dodge. I need to replace the bulb, but have no
> > > > idea what
> > > > > the
> > > > > > size of the bulb is. Already determined that it is not a #90
> > > > or #1004.
> > > > > Went
> > > > > > to the local auto parts stores and we couldn't match it up.
> > > > Any ideas ?
> > > > > >
> > > > > > Thanks,
> > > > > >
> > > > > > Ron
> > > > > >
> > > > >
> > > > > *************************************************************
> > > > >
> > > > > To unsubscribe or set your subscription options, please go to
> > > > > http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
> > > >
> > > > *************************************************************
> > > >
> > > > To unsubscribe or set your subscription options, please go to
> > > > http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
> > > >
> > >
> > > *************************************************************
> > >
> > > To unsubscribe or set your subscription options, please go to
> > > http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
> >
> >
>
> *************************************************************
>
> To unsubscribe or set your subscription options, please go to
> http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1