Re: [FWDLK] Hand Brake Warning Light

[Jim Hoekendijk <jim.hoekendijk@xxxxxx>]

Ron,

I went into my garage and looked in the bag with lights. There's a 
carton with one lamp left, I think it's the one, but I'm not sure...
It's similar to a 90, but longer, it's a....
1004

Jim.

----- Oorspronkelijk bericht -----
Van: Ron Waters <ronbo97@xxxxxxxxxxx>
Datum: vrijdag, september 2, 2005 8:25 pm
Onderwerp: Re: [FWDLK] Hand Brake Warning Light

> Jim -
> 
> Neil Vedder also suggested the 1816, but when I went to the local 
> auto parts
> store, the 1816 they showed me is a tiny, single contact bulb. The 
> one I
> need is a two contact bulb with a standard size base, similar to a 
> #90. I
> should mention that this is hand brake warning light, part # 
> 1770721. Any
> ideas ?
> 
> Ron
> 
> ----- Original Message ----- 
> From: "Jim Hoekendijk" <jim.hoekendijk@xxxxxx>
> To: <L-FORWARDLOOK@xxxxxxxxxxxxx>
> Sent: Thursday, September 01, 2005 1:38 AM
> Subject: Re: [FWDLK] Hand Brake Warning Light
> 
> 
> > I had the same problem with my 57 Dodge. I found the answer in my
> > workshop manual and the bulb at Pep Boys. It's only that I've 
> lent my
> > manual to someone I can not reach now... Could be 1816, since I 
have
> > some cartons left...
> > Be carefull not to use to much candle power, I changed my lens 
> because> the prior owner did use a bulb with to much cancle power, 
> and the red
> > lens is melted.
> >
> > Jim Hoekendijk.
> > The Netherlands
> > '57 Dodge D500
> >
> >
> > ----- Oorspronkelijk bericht -----
> > Van: Ron Waters <ronbo97@xxxxxxxxxxx>
> > Datum: donderdag, september 1, 2005 3:27 am
> > Onderwerp: Re: [FWDLK] Hand Brake Warning Light
> >
> > > Unfortunately, neither work. The glass globe is too large to fit
> > > inside the
> > > threaded cylindrical part that the front lens and bezel thread
> > > onto. Am I
> > > missing something ?
> > >
> > > Ron
> > >
> > >
> > > ----- Original Message ----- 
> > > From: "Bill Watson" <wwatson5@xxxxxxxxx>
> > > To: <L-FORWARDLOOK@xxxxxxxxxxxxx>
> > > Sent: Wednesday, August 31, 2005 3:54 PM
> > > Subject: Re: [FWDLK] Hand Brake Warning Light
> > >
> > >
> > > > According to the Chrysler Parts Catalogue, it is part number 
142
> > > 453.which
> > > > is bulb #90 (6 candlepower)
> > > >
> > > > Dodge used a 142 451which is bulb #68 (3 candlepower)
> > > >
> > > >
> > > > Bill
> > > > Vancouver,. BC
> > > >
> > > >
> > > >
> > > > ----- Original Message ----- 
> > > > From: "Ron Waters" <ronbo97@xxxxxxxxxxx>
> > > > To: <L-FORWARDLOOK@xxxxxxxxxxxxx>
> > > > Sent: Wednesday, August 31, 2005 12:29 PM
> > > > Subject: [FWDLK] Hand Brake Warning Light
> > > >
> > > >
> > > > > Hi Gang -
> > > > >
> > > > > My 58 Plymouth has a hand brake warning light, which is the
> > > same as the
> > > > one
> > > > > used on the 58 Dodge. I need to replace the bulb, but have no
> > > idea what
> > > > the
> > > > > size of the bulb is. Already determined that it is not a #90
> > > or #1004.
> > > > Went
> > > > > to the local auto parts stores and we couldn't match it up.
> > > Any ideas ?
> > > > >
> > > > > Thanks,
> > > > >
> > > > > Ron
> > > > >
> > > >
> > > > *************************************************************
> > > >
> > > > To unsubscribe or set your subscription options, please go to
> > > > http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
> > >
> > > *************************************************************
> > >
> > > To unsubscribe or set your subscription options, please go to
> > > http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
> > >
> >
> > *************************************************************
> >
> > To unsubscribe or set your subscription options, please go to
> > http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
> 
> 

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1