Re: [FWDLK] Oil Pump Priming Tool

[Nathan Nuttall <nnuttall@xxxxxxxxxxx>]

It should be flat screwdriver type. That distributor is the same as the LA small block (as far as dimensions go). Sounds like you got the wrong one. If you have trouble with Jegs, you can get one from Hot Heads for $12. That is where I bought mine. The pump should rotate clockwise from the top.

Nathan Nuttall
56 Savoy
68 Barracuda


> -----Original Message-----
> From: Ron Waters [mailto:ronbo97@xxxxxxxxxxx]
> Sent: Thursday, September 30, 2004 3:17 PM
> To: L-FORWARDLOOK@xxxxxxxxxxxxx
> Subject: [FWDLK] Oil Pump Priming Tool
>
>
> Hi All -
>
> So I received my Oil Pump Priming Tool from Jegs yesterday (it's Mopar
> Performance number 4286800). On either end is a hex head. Is
> this correct
> for my 58 Ply 318 ?  For some reason, I assumed that one end
> would have a
> flat head like a standard screwdriver.  I haven't pulled the
> distributor or
> the gear thingee, so I want to check with y'all first.  Also,
> do I need to
> spin the oil pump clockwise or counter-clockwise ?
>
> Thanks,
>
> Ron
>
> *************************************************************
>
> To unsubscribe or set your subscription options, please go to
> http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
>
>

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1