[FWDLK] Resending 'Radio Conversions' by request.

[Louis Rugani <X779@xxxxxxxxx>]

--- Begin Message ---

• From: "L-Soft list server at LISTS.PSU.EDU (1.8e)" <LISTSERV@xxxxxxxxxxxxx>
• Date: Sun, 22 Feb 2004 01:30:34 -0500

Your message  is being returned to  you unprocessed because it  appears to have
already been  distributed to the  L-FORWARDLOOK list.  That is, a  message with
identical text  (but possibly with different  mail headers) has been  posted to
the list recently, either by you or by  someone else. If you have a good reason
to resend this message to the list (for instance because you have been notified
of a hardware failure with loss of  data), please alter the text of the message
in some way and  resend it to the list. Note that  altering the "Subject:" line
or adding blank  lines at the top  or bottom of the message  is not sufficient;
you should  instead add a  sentence or  two at the  top explaining why  you are
resending the  message, so that the  other subscribers understand why  they are
getting two copies of the same message.

--- Begin Message ---

• From: Louis Rugani <X779@xxxxxxxxx>
• Date: Sun, 22 Feb 2004 00:26:16 -0600

Couple of notes: these radio-conversion shops don't convert AM car
radios to FM, they *add* FM capability. You'll still have AM.

Also they will put in a resistor for those who request it (at no charge)
that will let the radio take a few seconds to "warm up" just like a tube
set.

The FM they add will be stereo, and there is a two-cone speaker you can
install in your current speaker grille that will give you some stereo
separation without having to bolt on those incorrect extra speakers.

Regards....
Lou
~~~~~~~~~~~~~ **-=\/=-** ~~~~~~~~~~~~~

The opposite of bravery is not cowardice, but conformity.
       ? Robert Anthony

--- End Message ---

--- End Message ---