Re: IML: Need alignment after '67 steering gearbox swap?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: IML: Need alignment after '67 steering gearbox swap?
- From: "Bill Watson" <wwatson5@xxxxxxxxx>
- Date: Wed, 29 Dec 2004 10:05:46 -0800
There may be many teeth in the spline, but many steering wheels have one
section with a wider spline (usually also flat on top). The steering wheel
will have a matching section. Thus the wheel goes on only one way. Will
need to do adjusting at the other end of the column.
Bill
Vancouver, BC
----- Original Message -----
From: "Christopher Hoffman" <imperial67@xxxxxxxxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Wednesday, December 29, 2004 9:09 AM
Subject: Re: IML: Need alignment after '67 steering gearbox swap?
> Nope, the wheel can be oriented in as many ways are there are teeth in the
> spline at the top of the steering column.
>
> Chris in LA
>
> On 12/29/04 8:31 am, DR CHALLENGER (drchallenger@xxxxxxxxxxx) wrote:
>
> > i thought the wheel only went on 1 way.
>
>
----------------- http://www.imperialclub.com -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
Back to the Home of the Forward Look Network