Quoting Christopher Hoffman <imperial67@xxxxxxxxxxxxx>: > Brad is right, the tilt and tilt/tele columns were (GM) Saginaw units > starting in 1967 (first year for the collapsible design). I would venture a > guess that if they interchanged, Mother Mopar would not have fit a different > wheel design when you ordered the adjustable steering column. May be GM used a Chrysler column! :) Even to this date, OEM's use parts made by component suppliers. Very likely, the same supplier was subcontracted by both GM and Chrysler. Another example is the oil pressure sending units. Ford and Chrysler used the same parts (at least they look identical). D^2 ----------------- http://www.imperialclub.com ----------------- This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm