67 and 68 suspension parts should be the same. But I think that the
interchangability will be limited, especially with earlier years.
The lower ball joints have to be replaced along with the lower control arm
because the ball joint is very tightly pressed in. This is the factory
recomendation. I have replaced the lower ball joint without replacing the
control arm, but I did not know the above at the time. Also, back then (before
I knew of the IML) I would have never found another replacement control arm.
D^2, 2x68
Quoting Rob McCall <Rob_Mopar@xxxxxxxxxxx>:
> OK, since it's been quiet I'll ask some questions to stir things up. Plus,
> I do need some answers.
>
> I'm looking at the online Moog catalog and they don't have a '67 Imp on the
> list. They have the ball joints listed as '68-75. Now I was under the
> assumption that the '67-68 front suspension was essentially the same. Am I
> right, and the Moog catalog is off (it can happen), or am I completely out
> of line (or is that alignment)?
>
> And along those lines, just what years are the same for things like the
> control arms, steering linkage, subframes, etc? I't more for my own
> curiosity than anything else.
>
> Thanks,
> Rob McCall
> '67 Le Baron
>
>
>
>
Back to the Home of the Forward Look Network