|
Remove the plugs and load the cylinder with trans. oil and penetrating
oil. Let it lay for 24 hours. then with a big bar and gentle pushes while a
friend hits the starter try to get some movement. If not try more oil and 24
hours again May take 3 trys. if you get it free, load with more oil, turn
it over till you get compression on all cylinders. If you can get it, you
may have save your self, from an engine rebuild, done forget to change
oil before you try to run it.
This has worked for me many times.
Good luck,
Steve
|
Back to the Home of the Forward Look Network