'68 kick panel screws

["Kate Triplett" <ad_ablurr@xxxxxxxxxxxxxxxxxxxxx>]

>>Snip<<
Date: Thu, 10 Jun 2004 16:46:51 -0700 (PDT)
From: David Duricy
Subject: Re: IML: '68 kick panel screws
Reply-To: mailing-list@xxxxxxxxxxxxxxxx
Much obliged, Kate.

Thanks,
Dave

--- Kate Triplett
wrote:
> I will look at Lucille tonight and report....
> >>>

OK David,

Reading from my hastily scribbled-on-envelope (upside down in the dark with 
flashlight):

The THREE screws holding Lucille's sill trim are panhead Phillips, bright but 
not quite chrome looking'

The kick panel is carpeted, but I did find two screws - one right up under the 
molded plastic vent panel far forward and against firewall - it's a "sombrero" 
type Phillips, same as the many that hold plastic trim panel inside door frame. 
There is a second screw, an oval-head Phillips, chrome, that holds the 
doorframe end of a plastic wrap-around extension of the carpeted piece - this 
one screws in pointing forward, into the door frame. I could not see or feel 
any others, so think there may be a couple of clips?? in the panel backer.

 This car has never been apart in this region of the interior (wish I could say 
the same for the dadburn AutoTemp) so I feel confident these are good findings. 
It may be different for a two-door? Hope it's of help to you!


Kate Justet Triplett
Kate's Custom Gunleather
Monroe, Washington
Proud mother of a soldier
and owner of  "Lucille" 1968 Crown 4 door HT