How do I determine the type of fluid that is in my 1982 Imperial? And what would be the process of converting? After driving the car for a while, the brakes still just don't feel right to me. I was thinking of pulling the rear wheels to see what I can see. I have step on the pedal real hard and the wheels did not lock, I don't know if this is normal or not? Can any body help me with this? Lawrence R Noskaelnoska@xxxxxxxxxxxx Hauser, ID 83854 -----Original Message----- From: mailing-list-owner@xxxxxxxxxxxxxxxx [mailto:mailing-list-owner@xxxxxxxxxxxxxxxx]On Behalf Of Stevan Miner Sent: Tuesday, May 11, 2004 4:20 PM To: mailing-list@xxxxxxxxxxxxxxxx Subject: Re: IML: Silicone brake fluid Hi Chris, I use silicone brake fluid in all of my collector cars for several reasons. It isn't corrosive to paint, doesn't absorb water and is alot easier to work with than conventional brake fluid. I've never had any problems with it. Steve Miner Miner Auto Service Winnebago, MN 56098 ----- Original Message ----- From: "Christopher Middlebrook" <delamothe@xxxxxxxxxx> To: <mailing-list@xxxxxxxxxxxxxxxx> Sent: Tuesday, May 11, 2004 12:47 PM Subject: IML: Silicone brake fluid > > > Hello fellow Imperialists, > > I was wondering if any of you out there has used silicone based brake fluid in your brake overhaul projects. > > Any wisdom, comments, etc. is greatly appreciated. > > Also, I appreciate any warnings, background, pitfalls, etc. from any of you fellow members who turn a wrench on the 61-63 models as far as the brakes are concerned. > > Thank you in advance > > Chris Middlebrook > 62 custom southampton > > > > _______________________________________________ > Join Excite! - http://www.excite.com > The most personalized portal on the Web! > >