Hi Jack,
I've had quite a few of these with the nitrofill floats that get "heavy". No
matter where you set the float level it will still run rich. Did you replace
the floats? Does it load up all the time or just when cold. If it's just
when cold your choke pull-ff adjustment could be off.
Steve Miner
Miner Auto Service
Winnebago, MN
----- Original Message -----
From: "jlindholm " <jlindholm@xxxxxxxxxxxxxxxxxxxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Saturday, November 22, 2003 11:10 PM
Subject: IML: More Thermoquad questions
> Hi All,
> I just rebuilt my tq last night, and followed all the advice I could
glean from this site and the web. It looks nice,, But
> the car won't idle and loads up badly.
> any thoughts?
> the choke seems to be working, and the floats were set to 1" as per
> recommendation.
> this is pretty much my last effort before going for an AFB.
>
> along these lines, is there any adaptor needed to fit a 625cfm carter afb
to the spreadbore manifold on my 73?
> (I have this carb laying around here)
>
>
> any guidance would be much appreciated.
>
>
> Many Thanks
>
>
> Jack
>
> 73, not happy
>
> 81 happy
>
>
Back to the Home of the Forward Look Network