You don't need to replace it, all that you need to do is take it
apart and clean the contacts inside. If you want to know how to do this yourself
I can explain, if not find someone who is good with fine mechanical work. They
are really very simple devices and completely repairable.
Needing A Left Side Taillight bezel and other trim parts.
Sent: Tuesday, June 10, 2003 5:14
AM
Subject: Re: IML: 55 imp electric
windows
HAVE YOU HAD ANY LUCK LOCATING A 4 WAY ELECTRIC WINDOWS SWITCH FOR A
56 IMPERIAL 2 DOOR CROWN . I AM RESTORING AND THE DRIVERS 4 WAY
HAS 3 OUT OF 4 BUTTONS WORKING AND 1 IS NOT
THANKS
ALLEN AND SALLY SOUNHEIN 1956 CROWN 2 DOOR RESTORING ALMOST DONE
On Mon, 09 Jun 2003 16:30:11 -0700 "A. Foster" <monkeypuzzle1@xxxxxxx>
writes:
Hello All;
Believe it or not I think that the big three all used the same
window switch manufacturer. The Switches in my car are remarkably similar to
those used in some 50's GM cars like Oldsmobiles with the exception of the
bezel, the mounting is the same so it probably uses the same spring clips. I
removed the ones from my car to give them a good cleaning and those clips
actually play a role in hold the assembly together as well as in the door
panel.
It would not surprise me at all if Ford and Chrysler used the
same window motors at that time. After all Autolite made horns for
everyone including G.M and they made the window motors in my 54'.
Best Regarrds
Arran Foster
1954 Imperial Newport
Needing A Left Side Taillight bezel and other trim parts.
----- Original Message -----
Sent: Sunday, June 08, 2003 2:59
PM
Subject: Re: IML: 55 imp electric
windows
I hhave a 55 Newport 2 door where do you get the little
spring clips that hold the electric switches in?
Allen and Sally Sounhein Pharmacists
Good
Shepherd Outpatient Pharmacy, ACC, Lab, X-ray
450 W Highway 22 suite
13 847 381 1230
Barrington,IL
60010
allen.sounhein@xxxxxxxxxxxxxxxxxx