Keith,
I have a 58 in the USA and I can assure you that I would
not have suggested trying any kind od parts store for what you want. In
fact, finding some acceptable spark plug wire covers would be extraordinarily
daunting for anyone, regardless of geographic location.
Since it is going to be a long term project to find the
covers, I suggest you consider leaving what you have alone. If I recall,
you have some kind of rubber grommet on your car that the wires go
through. I think you may find, from a technical point of view, that what
you have is superior to the covers. I have seen pictures of the grommet
arrangement in various places and they are quite acceptable to even the purest
of the pure.
Keep scoping e-bay for the covers. Also try some Hemi
specialists, like Power Play, at
They have a message board area, so you can post your new found
need there. Do your valve covers still have the cylindrical protrusions
welded on? It's into these that the screws holding the wire covers
go. If you no longer have them, attaching anything will prove nettlesome
at the very least.
I doubt if any American scrap yard will have these or be
willing to part with them minus the rest of the engine
Hugh
|