Early Hemi and MSD

["DanT" <dplysedan@xxxxxxxxxxx>]

I little info that I found out about the MSD, it doesn't work after 3000
rpm. If you have a good electronic dist. and a good coil you won't have any
problem and it's a lot cheaper then installing an MSD
----- Original Message -----
From: <Crown58imp@xxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Saturday, January 11, 2003 7:23 PM
Subject: IML: Early Hemi and MSD


>         Before the list crashed a couple of days ago, there was a
gentleman
> asking about installing an MSD ignition control unit on his 392 Hemi.
> Performance Automotive Warehouse (PAW) just released a billet electronic
> distributor for the 331-354-392 Hemi. You said that there weren't any MSD
> control units for the 392 and this is not true. The aforementioned
> distributor is being made by MSD themselves. If you call PAW (818)
678-3000
> they'll be able to tell you which is the proper control unit for a 392.
Their
> website is www.pawengineparts.com. I hope this helps. Have a nice day.
>
>             Doug
>             58 Crown coupe
>
>