|
I'm assuming your sure you have the correct shocks & the
bushings are the same size as the old ones.
John
----- Original Message -----
Sent: Tuesday, December 31, 2002 11:45
AM
Subject: IML: Rear Shocks Clunking
After all the repairs I have done to my 1990 Imperial, it is
running and driving very nicely. There is one very annoying thing
however. Every little bump I go over produces a remarkable clunk in the
rear of the car. I investigated this evening and found the
problem. Where the bolt that goes through the top of the shock it isn't
tight enough in the shock. It appears to need some kind of sleeve in
there or something. Even where the bolt goes through the car side of the
mount, it is loose in there. I am certain I installed it in the same way
it came apart so I am at a loss as to what the solution could be. Does
anyone have any advice/experience on this topic?
Brad Hogg
Winnipeg,
Manitoba
http://www.nybclub.org/bradhogg/index.htm
1990
Chrysler Imperial 4-door Sedan (the KImperial)
1978 Chrysler Newport 4-door
Hard Top (the Newporker)
1976 Chrysler New Yorker Brougham 4-door Hard Top
(the Black Beast)
1968 Chrysler Newport Custom 4-door Sedan (Grand-Dad's
car)
----------------- http://www.imperialclub.com
-----------------
This message was sent to you by the Imperial Mailing
List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx
and your response will be
shared with everyone. Private messages (and
attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To
UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
|
Back to the Home of the Forward Look Network