Buy a new one and put it on yourself. This is not a difficult job, and does
not require any special tools or super mechanic type skills.
You could also buy a kit and rebuild it yourself - I'd advise that if you
are at all handy with small tools, have a clean well lit place to work, and
a lot of patience. The instructions with the kits are very complete, and if
you read them carefully, you can do a good job of rebuilding a used
carburetor, so long as it has no badly worn parts in the throttle body, and
no bent, cracked or broken metal parts. The kits cost around $50, plus
you'll need some spray type carburetor cleaner and some rags, plus your
normal hand tools.
Dick Benjamin
----- Original Message -----
From: Kevin Pacheco <kevin50187@xxxxxxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Sunday, September 08, 2002 8:05 PM
Subject: IML: Need a replacment carb!!
> I have to option to buy a new carb, get mine rebuilt, or buy a used
rebuilt
> one,
> what should i do?
>
> a new one plus paying someone to put it in is like ...?
> a rebuld on mine would be 200
> and a used rebuilt on would be...?
> Kevin Pacheco
> 71 IMP
>
> _________________________________________________________________
> Send and receive Hotmail on your mobile device: http://mobile.msn.com
>
>
>
Back to the Home of the Forward Look Network