HELP! I overheated/Is it done/adapter gasket found

[Thad <gentrysgarage@xxxxxxxxx>]

Here's the answer! You can get the gasket seperate! It
is the same for the 90 degree as the straight!
Thanks Bob!
Thad the ImpPoster
1965 Imp the Grey Ghost
LaLa Land Cali

--- Bob Harris <b1werks2@xxxxxxxxxx> wrote:
> Thad -
> 
>     I hate to jump in the middle, but I remember
> reading something of your
> problem with an oil filter mounting leak. If this is
> one of those where the
> filter is attached to a 90 degree adapter which is
> mounted onto the block,
> there is a gasket between the adapter and the block,
> it is Chrysler PN
> 3577674. Hope this helps..................Bob Harris
> ----- Original Message -----
> From: "Thad" <gentrysgarage@xxxxxxxxx>
> To: <mailing-list@xxxxxxxxxxxxxxxx>
> Sent: Wednesday, August 21, 2002 9:56 AM
> Subject: Re: IML: HELP! I overheated/Is it done?
> 
> 
> >
> > --- Dick Benjamin <DickB@xxxxxxxxx> wrote:
> >
> > > The oil filter adapter gasket is probably not
> > > available separately, you may
> > > have to either buy a complete set for the
> engine, or
> > > make one yourself out
> > > of sheet gasket material.  This is most likely
> just
> > > a heavy paper type
> > > gasket, not rubberized cork or anything thick,
> but
> > > copy the original as
> > > closely as you can.
> > >
> > > Dick,
> >   Right on both counts! It is a heavy paper gasket
> at
> > least on the 60's smallblocks. I have never seen
> it
> > listed seperately, but I have to say I never
> checked
> > Mother Mopar!
> >
> >   Thad the ImpPoster
> >   1965 Imp the Grey Ghost
> >   LaLa Land Cali
> >
> > __________________________________________________
> > Do You Yahoo!?
> > HotJobs - Search Thousands of New Jobs
> > http://www.hotjobs.com
> >
> >