Re Help! 1975 Imperial won't start
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re Help! 1975 Imperial won't start



the trigger to the coil is in the distribtor


>From: Jeff Ingraham <jeff_ingraham@xxxxxxxxx>
>>Hi,
>   But the spark is not coming off the coil so i don't
>think the distributor can be in the mix at that point.
>Thanks!
>Jeff
>
>--- dardal@xxxxxxxxxxxxxxx wrote:
> > Try installing a set of old points ignition!  ;)
> >
> > D^2
> >
> > PS, unfortunately, Mike's suggestion could be right.
> >
> > Quoting Mike Pittinaro <mechimike@xxxxxxxxx>:
> >
> > > > turned off.   We replaced the balast resistor,
> > the
> > > > electronic ignition module and the coil.  All
> > with
> > >
> > > Zounds!  Quite a mystery.  It might be something
> > with
> > > the distributor.  Check the cap, rotor, and, it
> > may
> > > sound dumb, but make sure its turning.  The
> > > distributor shaft, drive gear, or even the timing
> > > chain may have given up the ghost.
> > > --Mike Pittinar


_________________________________________________________________
Send and receive Hotmail on your mobile device: http://mobile.msn.com




Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.