a lot of new belts that the "teeth" look on the bottom, the belt actually grips on the sides so the teeth are not an issue >From: Jim Gathmann <jim_gathmann@xxxxxxxxx> >>As for the power steering- are you saying you put a >belt with teeth in place of a belt which originally >was flat (without teeth)? If you did, then get a belt >without teeth (shouldn't work at all if you have the >wrong belt in?). >--- "David A. Barker" <d_barker@xxxxxxxx> wrote: > > Hi All, > > A few questions: > > > > 1. I get a "rattle" type of noise from my > > powersteering. A miniscule shot > > of belt dressing on the belt and it shuts right > > up...for just a little > > while(a few minutes) The belt is as new- put it on 1 > > 1/2 years and 5k > > miles ago so it looks new. Could this be something > > with the inner surface > > of the pulley or the fact that the belt is a > > "toothed" style V and not > > the old smooth V? > > > _________________________________________________________________ MSN Photos is the easiest way to share and print your photos: http://photos.msn.com/support/worldwide.aspx