ORDER is going out ups.......this fri am.......... thanks again........... Just thought I'd share with you that I part IMPERIALS FROM 1957-75 and have access to the newer ones ,also. I also part CHRYSLER product cars from 1964-78. ALL makes and models. I also SELL CHRYSLER and IMPERIAL resto projects and drivers. I also dabble in FULL-SIZE GM product cars 1970-76. ALL makes and models. I also have access to a used auto yard with over 2500 cars, trucks and big vehicles. Domestic and foreign. From 1927 to present. I look forward to being able to help you in the future. PLEASE KEEP ME IN MIND FOR ALL YOUR USED AUTO NEEDS. So if you ever need anything just let me know. Send me a needs list with all the particulars. Feel free to also call. THANK YOU FOR YOUR TIME AND MAY GOD BLESS YOU :o) , Phil (bigdog1) IHS <>< CONTACT: PHIL JULIANO JR. 4735 RTE 14 SODUS,NY 14551 315-483-6757, EVES 7-10PM EASTERN TIME FAX: 315-483-8006 EMAIL: BIGDOG1@xxxxxxxxxxxxxxxx ALSO BUYING CARS..........will travel up to 500 miles. Paying fair market up to $1000.00 for the right cars. ANY CONDITION ACCEPTED. ----- Original Message ----- From: "D. Dardalis" <dardal@xxxxxxxxxxxxxxx> To: <mailing-list@xxxxxxxxxxxxxxxx> Sent: Wednesday, July 03, 2002 10:31 AM Subject: IML: 68 door hinge? > My sedan's lower hinge seems to be giving up. The passenger front door > needs to be raised to close properly. The problem seems to be a small > sleeve on the shaft of the lower hinge. Are these hinges repairable (doubt > it, I can't see how one can remove the shaft), or should I just > replace. Anybody can sell me one of those? > > Now, the tough part. Say I get a replacement and attempt to replace > it. Do I need to remove the door? The access to the screws that hold the > hinge to the door is sort of limited, but with a wiggle joint and a real > short 9/16", there is a chance. Anybody has experience on that? Or should > I let a professional body guy handle it? > > Thanks for your suggestions. > D^2 > > >