Hey all, What are the best methods for removing paint from large body panels. I have been doing it by hand with a sanding block and 220 grit sandpaper, but it is taking forever. I have an air compressor and 2 air sanders, but I am unimpressed with the results of using them. One of them is a really cheap one that my wife bought for really cheap (though even with that she paid too much for the piece of junk), and I have a nicer one, but it requires about 90 psi to operate, and my compressor will only put out about 60-65 psi at a sustained rate with the volume of air that the sander requires. Needless to say it works ok until the sandpaper touches the car at which time it slows to a stop without having done much. What do most people use for removing paint? Mark Elliott 64 Crown 76 Fleetwood Brougham