Try pushing on the pointy things sticking through the ring into the underside of the trunk lid. As I recall, they are sealed with some rubbery stuff, sort of a caulk. There is more than one screw holding the ring in place. Have to get a nut driver to stick up through the larger holes in the underside to get at them. At least that's the way my 61 was. Henry ----- Original Message ----- From: <Imperial59crown@xxxxxxx> To: <mailing-list@xxxxxxxxxxxxxxxx> Sent: Tuesday, July 02, 2002 6:51 PM Subject: IML: Flight sweep trim ring > I was doing some spot touch up painting on my '59 Imperial today, and while > waiting for areas to dry I decided to remove the trim ring around the > Flightsweep tire. I removed the screw at the top which released the band, but > was unable to get the band off. I started prying with a screw driver, but I > got afraid I might bend it. Does anyone out there have previous experience > with this? I need to get the ring off to repair a small rust spot that goes > up under it towards the rear of the trunk. > Thanks in advance, > Bill '59 Crown > >