80s retrofit fuel flow sensor vendor found

[Imp1983@xxxxxxx]

Second post, first one bounced. (?)


Hi all,

For those who need to know, I found the vendor of the Fuel Flow
Sensors for the 1980s carburetor retrofits.  The sensors are
still available.

Here is the web site:  www.floscan.com

Below is an e-mail exchange I had.  Have fun!

=============================================================


Daniel,

Yes, we're the same company.  Specify P/N 264-905-04 for the replacement
sensor.  Cost is $110 each and we accept all major credit cards for
payment.

Regards,
Joe Dydasco    

-----Original Message-----
From: Daniel Wing 
Sent: Thursday, May 30, 2002 12:26 PM
To: joe.dydasco@xxxxxxxxxxx
Subject: Fuel flow sensor for automotive use


Hello,

I was wondering if this was the company that provided the fuel flow
sensor for the Chrysler Imperial carburetor retrofit program in the
1980s?

I have a fuel flow meter on my car that has the name FLOSCAN 264 on it.
There is some German writing on the housing and there are three wires
that come out of it with connectors on the end.

Let me know, thanx!

Daniel Wing
=============================================================

Dan Wing
Imp1983@xxxxxxx

'83 Imp, beige, wire wheels,
factory/dealer carb conversion